ZHEJIANG SANMEN BOER TRAFFIC FACILITY FACTORY

High quality product, professional service, being the core supplier in laser industry!

Home > Exhibition > Content
Maintenance of rubber Conveyor belts
- May 12, 2017 -

Conveyor belt in the transport and storage, should be kept clean, avoid direct sunlight, rain and snow leaching, to prevent the acid, alkali, oil, organic solvents and other substances affecting the quality of rubber contact, and 1 meters away from the heating device.

The storage room temperature should be maintained at-15 ℃-+ 40 ℃, the relative humidity should be maintained between the 50-80.

The conveyor belt in the storage shall be placed in volume, not folded, and shall be flipped once every season.

• Conveyor belts should not be more than 5.0 m/s, transport block size, wear large materials and use fixed plow-type unloading device should be used as low speed. When exceeding the prescribed speed, the service life of adhesive tapes will be affected.

The relationship between the diameter of the transmission drum and the conveyor belt of the 5 conveyor, the matching of the driving drum and the requirements of the roller groove angle, should be based on the design requirements of the conveyor.

Shan to alleviate the impact and abrasion of the material on the tape, the direction of feeding should be carried out in the direction of the tape; the drop of material on the tape should be minimized; feeding mouth should be avoided by the roller or roller, and the feeding section should shorten the spacing of roller and take buffering measures. In order to prevent scraping tape, the contact part of scraper cleaning device and discharging device and adhesive tape should adopt the rubber plate which is suitable for hardness, and do not take the lead with the glue of the cloth layer.